48 Leone Lane
Chester,NY 10918, USA
Ph (888) CHEMCOR
                (243-6267)
Ph (845) 469-5800
Fax (845) 469-5855

POLYETHYLENE EMULSIONS

Chemcor produces both High Density (HDPE) and Low Density Polyethylene (LDPE) Emulsions. These water based emulsions are very fluid, easy to use surface modifiers for a wide range of water based products. They are typically manufactured as Anionic, Cationic and Nonionic emulsions. Anionic emulsions tend to have the best water resistance but may increase VOC's (volatile organic compounds) and be slightly less cost effective. Nonionic are the most common and versatile emulsions. All of these products have sub-micron wax particles and can be used at very high levels (10% plus) without hurting gloss. Following are a small sample of our Polyethylene Emulsions. Please contact us for a full listing or to request information on a grade you don't find here.

PROPERTIES: HDPE Emulsions: Rub Resistance, Slip, Heat Resistance, Anti-blocking, Durability.
                             LDPE Emulsions: Burnishability, Release, Rub Resistance, Slip

MARKETS: HDPE Emulsions: Graphic arts coatings, Paints, Floor Finishes, Textiles, Inks, Industrial Coatings and Leather Coatings.
                       LDPE Emulsions: Floor Finishes, Graphic Arts Coatings, Mold Release, Fruit Coatings, Textiles and Leather Coatings.

PROPERTIES OF CHEMCOR HDPE EMULSIONS
PRODUCT

SOLIDS
%
   IONIC ACTIVITY
 HARDNESS*
MELTING POINT°C
 FDA STATUS
20N35
34-36
 NONIONIC
<0.5
111
YES
121N30
29-31
 NONIONIC
<1.0
117
YES
316N30
29-31
 NONIONIC
<0.5
140
YES
325G
34-36
 NONIONIC
<0.5
138
****
325N35
34-36
 NONIONIC
<0.5
138
****
325N40SP
39-41
 NONIONIC
<0.5
138
****
330N35
34-36
 NONIONIC
<0.5
137
****
392C30
29-31
 CATIONIC
<0.5
138
****
392N35
34-36
 NONIONIC
<0.5
138
****
EM 260
24-26
 ANIONIC
<0.5
138
****
EM260FDA
24-26
 ANIONIC
<0.5
140
YES
EM A25
24-26
 ANIONIC
<0.5
138
****
EM A35SP
34-36
 ANIONIC
<0.5
138
****
OA3N30
29-31
 NONIONIC
<0.5
130
****
PROPERTIES OF CHEMCOR LDPE EMULSIONS
PRODUCT SOLIDS%      IONIC ACTIVITY HARDNESS* MELT POINT°C FDA STATUS
10N30
29-31
 NONIONIC
3.0
106
YES
371N35
34-36
 NONIONIC
3.0
101
NO
540A25
24-26
 ANIONIC
2.0
108
YES
540C25
24-26
 CATIONIC
2.0
108
NO
540N30
29-31
 NONIONIC
2.0
108
YES
540N40SP
39-41
 NONIONIC
2.0
108
YES
645N35
34-36
 NONIONIC
6.0
101
NO
629A30
29-31
 ANIONIC
5.5
104
YES
629N40
39-41
 NONIONIC
5.5
104
YES
629G38SP
37-39
 NONIONIC
5.5
104
NO
*Hardness is measured in decimillimeters of needle penetration
****Products are approved under paragraph 29CFR176.180 and 175.300
YES indicates that the ingredients contained in the emulsion have FDA approval for use in food contact applications under 29CFR176.170 and 180. Approval of the final coating may be subject to extraction limits.